Accessories to complement your equipment

CD and DVD players - Vincent, Cambridge Audio, Bel Canto, Analysis Plus

Amplification - Valve Audio, Cambridge Audio, Bel Canto, TacT, Electrocompaniet

Products: TacT Audio

	SDAi 2175 and SDA 2175 Stereo integrated amplifier (SDAi) Stereo power amplifier (SDA) RCA, XLR balanced input. Pre-amp output balanced User programmable 6 dB input attenuation for each input Individual level and balance adjustment for each input with 0.1 dB steps Complete lack of noise Fully balanced design - all the way to the speaker terminals 75% less heat than class AB amps No relays or fuses in signal path RS 232 connection for software upgrades
	M 2150 and S 2150 True Digital EquiBit PCM/PWM power processing using proprietary Equibit processor Refined Equibit DSP algorithms No low-level D/A conversion at all No analog amplification at all No negative feedback at all 192kHz/24bit compatible Second order passive low pass filter. Four digital inputs RS 232 communication link for PC 90% efficiency - never runs hot 150 W into 8 Ohm Digital Resolution 16 - 24 bits
	Millennium MK3 True digital EQUIBIT PCM/PWM Power processing proprietary technology No low-level D/A conversions at all No analog amplification at all No negative feedback at all 750VA toroidal transformer with dual mono secondary windings Second order passive low pass filter RS 232 communication link for PC 150W into 8 Ohms.
	RCS 2.0S Digital pre-amplifier/processor 2 channels of room correction using 4 ultra fast Motorola DSPs Complete FFT measurement system running on Windows 98, 2000, XP Calibrated TACT Microphone Digital input sampling frequency up to 192 kHz Completely modular design of AD and DA converter RS 232 interface Daisy chain capability
	RCS 2.2X Digital pre-amplifier/processor Balanced and single-ended inputs 192 kHz upsampler at inputs 48 bit resolution in all processing Integrated measurement system. Extremely low jitter Digitally controlled analog output level Digital crossovers for subwoofer(s) Re-clocking at all outputs No noise in digital domain Triple-stage power supply with separate grounds
	TCS Mk II Digital pre-amplifier/processor 7 stereo analog & 8 digital inputs 10 single ended & 3 balanced outputs Room correction can be applied for each channel separately Upgradable to any future audio format Easy Room Correction setup via PC by RS-232 interface Dynamic range 112dB D/A converter 24bit/192kHz DTS, DTS ES, DTS neo:6 Dolby Digital, Dolby Digital EX Dolby Pro Logic II Stereo (PCM, LPCM)
	TDA 2200 Optimized low jitter clock system 2 x 20 Bands of parametric or shelving equalization High pass and low pass crossovers with 1st to 8th order slopes at any frequency above 20 Hz Time delay adjustment in 0,01 ms steps 192kHz/24 bits PC interface High-end analog DAC line out for active system setup

For more information please visit the TacT Audio web site on www.tactaudio.com.