Products: Amplification

We have an excellent range of amplifiers that are truly high end products.

Bel Canto
	eVo2i Stereo integrated amplifier, 120W into 8 Ohms 1Hz to 80KHz @ -3dB XLR and Single ended inputs
	PRe6 2 to 6 channel pre-amplifier 12 input pairs 8 configurable analog outputs Control bi- or tri-amplified speakers
	eVo (Power amplifier, 1, 2, 4 or 6 channel) 120W to 360W into 8 Ohms 1Hz to 80KHz @ -3dB XLR and Single ended inputs
	PRePro Home theater pre-amp / Processor DD Ex, PL2, DTS-ES, Matrix, DVD-A, MLP, 7.1 Matrix Upgradeable DSP/DAC 24bit / 192KHz DACs Pure path 7.1 throughput
	DAC2 Coax or Toslink inputs (digital) RCA analog outputs
	PHONO1 20Hz to 20KHz +/- 0.25dB Adjustable MC / 50Kohms MM RCA analog outputs
Electrocompaniet
	Nemo Class A power amplifier 600W into 8 Ohms >150A peak current
	AW250 Power amplifier 250W into 8 Ohms >100A peak current
	AW180 Class A power amplifier 180W into 8 Ohms >100A peak current
	AW120 Class A power amplifier 120W into 8 Ohms >100A peak current
	AW70 Power amplifier 220W into 8 Ohms (mono) 70W into 8 Ohms (stereo) >60A peak current
	ECD Digital to Audio converter XLR-AES/EBU, RCA,OPTICAL TOSLINK 32 - 96 kHz sampling frequency
	ECI-3 Integrated amplifier 70W into 8 Ohms >60A peak current
	ECI-5 Integrated amplifier 120W into 8 Ohms >80A peak current
	EC4.7 Pre-amplifier XLR & Single ended inputs & outputs
	ECP-1 MM & MC phono stage
Tact Audio and Lyngdorf Audio
	SDAi 2175 and SDA 2175 Stereo integrated amplifier (SDAi) Stereo power amplifier (SDA) RCA, XLR balanced input. Pre-amp output balanced User programmable 6 dB input attenuation for each input Individual level and balance adjustment for each input with 0.1 dB steps Complete lack of noise Fully balanced design - all the way to the speaker terminals 75% less heat than class AB amps No relays or fuses in signal path RS 232 connection for software upgrades
	M 2150 and S 2150 True Digital EquiBit PCM/PWM power processing using proprietary Equibit processor Refined Equibit DSP algorithms No low-level D/A conversion at all No analog amplification at all No negative feedback at all 192kHz/24bit compatible Second order passive low pass filter. Four digital inputs RS 232 communication link for PC 90% efficiency - never runs hot 150 W into 8 Ohm Digital Resolution 16 - 24 bits
	Millennium MK3 True digital EQUIBIT PCM/PWM Power processing proprietary technology No low-level D/A conversions at all No analog amplification at all No negative feedback at all 750VA toroidal transformer with dual mono secondary windings Second order passive low pass filter RS 232 communication link for PC 150W into 8 Ohms.
	RCS 2.0S Digital pre-amplifier/processor 2 channels of room correction using 4 ultra fast Motorola DSPs Complete FFT measurement system running on Windows 98, 2000, XP Calibrated TACT Microphone Digital input sampling frequency up to 192 kHz Completely modular design of AD and DA converter RS 232 interface Daisy chain capability
	RCS 2.2X Digital pre-amplifier/processor Balanced and single-ended inputs 192 kHz upsampler at inputs 48 bit resolution in all processing Integrated measurement system. Extremely low jitter Digitally controlled analog output level Digital crossovers for subwoofer(s) Re-clocking at all outputs No noise in digital domain Triple-stage power supply with separate grounds
	TCS Mk II Digital pre-amplifier/processor 7 stereo analog & 8 digital inputs 10 single ended & 3 balanced outputs Room correction can be applied for each channel separately Upgradable to any future audio format Easy Room Correction setup via PC by RS-232 interface Dynamic range 112dB D/A converter 24bit/192kHz DTS, DTS ES, DTS neo:6 Dolby Digital, Dolby Digital EX Dolby Pro Logic II Stereo (PCM, LPCM)
	TDA 2200 Optimized low jitter clock system 2 x 20 Bands of parametric or shelving equalization High pass and low pass crossovers with 1st to 8th order slopes at any frequency above 20 Hz Time delay adjustment in 0,01 ms steps 192kHz/24 bits PC interface High-end analog DAC line out for active system setup
Valve Audio
	Exclamé 100 100w stereo integrated amplifier Non-inverting 100 watts per channel @ 8ohm Power supply: 300VA Toroidal transformer Tube complement 1x 6922 Four pairs of complementary mosfets Volume pot, Noble standard grade
	Predator Non-inverting 200 Watts per channel @ 8ohm Power supply: 625VA Toroidal transformer Tube complement: 4 x 6922 4 pairs of complementary mosfets Volume pot, Alps Blue Velvet
	Black Widow pre / power amplifier combination Dual mono design Non-inverting 200 watts per channel @ 8ohm Power supply: 1000VA Toroidal transformers 6 Pairs of complementary mosfets Tube complement: 4 x 6922
	Genesis pre-amplifier Fully balanced design. Balanced and single-ended inputs Tube complement: 4 x 6H30, 4 X 6922 10 Separate toroidal transformers for logic, HT and Heater supplies 5Hz - 160KHz, -0.5dB Cardas Golden Ratio signal capacitors
	Genesis power Dual mono hybrid 1000 watt / channel 8 ohm 1600 watt / channel 4 ohm 5500 VA total Toroidal transformers Tube complement: 6 x 6922, 4 x 6H30 48 complementary output transistors
	Theatre Power 5.2 Non-inverting Balanced and single ended inputs 200 Watts per channel @ 8ohm Non intrusive HFO and DC offset protection for each channel 5 x 400VA Toroidal transformers Tube complement: 5 x 6922 15 pairs of complementary mosfets
Vincent
	Design line 2 Hybrid tuner RDS STU-1 SDV-3 CD/DVD player, prog scan, HDCD, separate DVD and CD circuitry, RCA, XLR, YUV, S-video, scart, VGA, optical & co-axial output Decoder/Pre amplifier SAV-C1 SAV-P200, 6 channel power amplifier, 6 x 200W into 8 Ohms 10Hz to 20KHz +/- 0.5dB 6 x RCA & XLR inputs Also available: SAV-P150, 6 x 150W into 8 Ohms
	SA-93 and SA-91 Plus Stereo pre-amplifier RCA and XLR inputs / outputs 10Hz to 20KHz +/- 0.5dB SA-91 Plus - Monoblock design
	SP-993 and SP-991 Plus Stereo power amplifier. 10Hz to 20KHz +/- 0.5dB. XLR & Single ended inputs. SP-991 Mono amplifier, 100W class A, 300W into 8 Ohms. SP-993 stereo, 60W class A, 200W into 8 Ohms.
	SP-998 and SP-997 Mono amplifiers SP-998, 300W into 8 Ohms, 50W Class A SP-997, 150W into 8 Ohms 10Hz to 20KHz +/- 0.5dB
	Design line 3 Hybrid Tuner RDS STU-2 1 x 6N15, 1 x 6DJ8 valves Hybrid stereo pre-amplifier SA-T1 20Hz to 20KHz +/- 0.5dB 2 x 12AX7, 1 x 12AU7 valves CD-S6 / CD-S6 MK RCA & co-axial outputs, MK version includes XLR outputs 10Hz to 20KHz +/- 0.5dB 3 x 12AX7, 1 x 12AU7 valves SP-T100 Hybrid mono amplifier 20Hz to 20KHz +/- 0.5dB 10W class A 100W into 8 Ohms 1 x 6Z4, 1 x 6N6 & 1 x 6DJ8 valves
	SV-236 Integrated hybrid stereo amplifier 10W Class A 100W into 8 Ohms 20Hz to 22KHz +/- 0.5dB Pre-out 3 x 12AX7 valves
	Design line 4 CD-S1.1 Hybrid HDCD-player 24 bit / 96KHz RCA, co-axial and XLR outputs 1 x 6N16 valve SV-226MK hybrid integrated stereo amplifier 100W into 8 Ohms 5Hz to 50KHz +/- 1dB Dual speaker terminals 4 x 12AX7 valves
	SA-31MK Hybrid stereo pre-amplifier 20Hz to 20KHz +/- 0.5dB 4 x 6N16 valves
	SV-129 Stereo integrated amplifier 20Hz to 20KHz +/- 0.5dB 100W into 8 Ohms
	SP-331MK Hybrid stereo amplifier 10W Class A 150W into 8 Ohms 10Hz to 20KHz +/- 0.5dB 2 x 6N16, 1 x 12AU7 valves
	PHO-111 Phono pre-amp MM1, MM2, MC inputs Independent power supply 20Hz to 20KHz +/- 0.5dB
	KHV-1 Hybrid headphone amplifier 20Hz to 20KHz +/- 0.5dB 2 x 12AX7B valves
	SV-382 6.1 AV Amplifier 6 x 100W into 8 Ohms